DIY - Bungee Pedal - October 02, 2007 - 08:24:28 PM
For those wishing to build a bungee release pedal, you will find step by step instructions for constructing a simple pedal that can be used with any launch system.

DIY - Bungee Launcher Dolly - September 08, 2007 - 07:15:54 AM
I have had several inquiries on how to make a bungee launch dolly and decided to post the method I personally use to make a dolly system that works for all types of aircraft.  Advantages of using a system like this include a smoother roll out and a positive nose up attitude to enhance launch flight.  - Carl Tulanko

DIY - Friction Free Rails for Bungee Launcher (PVC) - August 10, 2007 - 03:52:21 PM
The PVC Bungee Launcher has a new modification for it...a set of nearly frictionless rails.  Unlike some of the older foam covered rails that were previously designed and used, these won't hang up on the wings and provide a very smooth launch.  Read how simple it is to build a set of these rails for your PVC Launcher.

AirPower Models - 90mm EDF - July 14, 2007 - 11:41:04 PM
A step-by-step guide on setting up your first AirPower Models - 90mm EDF unit.

DIY - Bungee Launcher (PVC) - February 15, 2007 - 02:39:31 AM
If you can't seem to find a nice ready made bungee launcher, consider making one yourself.  Here's my launcher made from parts found at your local hardware store.

DIY - Ammo Box - Lipo Safe - February 01, 2007 - 04:16:56 AM
If you have concerns about safely charging your lipo packs, consider building a lipo safe.

HET-RC - EDF 6904 - January 15, 2007 - 02:34:41 AM
A step-by-step guide on setting up your first HET-RC - EDF 6904 fan unit.

Wemotec - Mini Fan 480 - January 01, 2007 - 05:09:21 AM
A step-by-step guide on setting up your first Wemotec Mini Fan 480 unit.

DIY - Bungee Launcher (Wood) - December 15, 2006 - 02:53:26 AM
Most bungee launchers are made from PVC, but if you'd like something a little nicer that will last for many years, consider making one from wood.